Steel twin-pack adhesive

Introduction

Ghaffari-brand steel adhesive is an acrylic-based two-part adhesive, designed for bonding and repairing steel, metals and hard surfaces by combining resin and hardener in a 1:1 ratio.

After the two components are mixed, this product dries in a short time and creates a very strong and durable bond. It can also be machined, turned, milled and painted, and remains stable against moisture, temperature changes, heat, vibration, mechanical stress and many chemicals.

Thanks to its high drying speed and exceptional bonding strength, the steel adhesive is an ideal choice for urgent repairs, industrial maintenance and heavy-duty applications. In some cases it can also replace welding and be used to repair broken parts.

Applications

Bonding and repair of steel and metals: Suitable for fixing heavy fractures, correcting defects in metal parts and repairing industrial equipment.

Industrial and household work: Suitable for urgent repairs, factory maintenance, use in garages and household repairs.

Welding replacement: Where welding is not possible or takes a long time, the steel twin-pack adhesive can act as a fast and cost-effective alternative.

Automotive, aerospace and shipbuilding industries: High resistance to moisture, temperature changes, heat, vibration and mechanical stress has made this adhesive widely used in harsh and variable environments.

Main features

1. 1. Fast drying:
2. The two-part (2K) combination allows fast drying in a few minutes, without the need for a long waiting time.
3. 2. Exceptional adhesion:
4. Creates a strong bond on steel, metal and other hard surfaces.
5. 3. Chemical resistance:
6. Resistant to many chemicals and acids.
7. 4. Resistance to temperature and moisture:
8. Stable performance in humid environmental conditions and at high or low temperatures.
9. 5. Machinability:
10. After drying, the surface can be machined, turned, milled and painted.
11. 6. Multi-purpose use:
12. Suitable for a wide range of industrial and household applications.

Directions for use

1. Surfaces must be completely dry, clean and free of oil, dust and rust. (For this you can use solvents such as alcohol or petrol.)
2. For metals and smooth surfaces, roughening the surface with fine sandpaper is recommended.
3. Dispense equal amounts of resin and hardener and mix them together on a clean surface. Mixing must be done carefully for at least 30 seconds to one minute so that a uniform reaction takes place.
4. Apply the adhesive to one of the surfaces and join the parts together.
5. Hold the parts in place for 5 to 10 minutes so that the initial set is achieved.
6. Final strength will be achieved after about 24 hours.
7. If machining, turning, milling or painting is required, proceed after full curing.

Note: Close each tube with its own cap (red cap on the red tube and black cap on the black tube).

Storage and warnings

• Keep out of the reach of children.
• Wear gloves, a mask and goggles when working.
• Keep in a cool, dry place away from direct light.

Summary

The steel twin-pack adhesive (2K Acrylic Metal & Multi Purpose Adhesive), with its combination of acrylate resin and hardener, high drying speed, powerful adhesion and resistance to harsh conditions, is an ideal choice for urgent repairs and industrial maintenance. The acrylic-based twin-pack adhesive is highly suitable for applications such as urgent repairs, bonding broken parts, sealing and crack repair of metal surfaces and joints, and delivers reliable performance.

This product can replace welding, resists moisture, temperature changes, heat, vibration and mechanical stress, and can be used in industrial and household environments. If you are looking for a strong, stable, fast-drying steel adhesive, the steel twin-pack adhesive is the best choice for you.

To see other products, visit the main page of Ghaffari Chemical Industries, and to explore similar products, see the two-part products category.