Slow-setting two-part putty – 90 minutes
2K EPOXY PUTTY – 90 MIN
Very strong adhesion - long working time - solvent-free, no weight loss
Introduction
Ghaffari slow-setting two-part putty - 90 minutes (2K EPOXY PUTTY - 90 MIN) is a two-part, epoxy-based putty adhesive and sealant designed for professional repairs, watertight sealing and gap filling.
With its long working time (90 to 120 minutes), this product allows precise application and easy shaping, and is an ideal option for projects that need more time for adjustment and shaping.
After the two components are combined at a 1:1 ratio, the slow-setting two-part putty - 90 minutes forms a uniform, flexible, shapeable texture and, after full cure, leaves a hard, resistant surface without cracking or shrinkage.
Applications
The slow-setting two-part putty - 90 minutes has wide application in various fields, including:
- Automotive manufacturing and transport
- Machinery and industrial repair
- Oil, gas and petrochemical industries
- Cooling and heating systems
- Woodworking
Main features
- Very strong adhesion: Bonds parts firmly and durably and creates a reliable joint.
- Long working time: gives enough time for precise positioning of parts and makes the job easier to carry out.
- Solvent-free, no weight loss: does not shrink while setting, keeps its weight and volume, and is safe.
- Machinable, turnable, millable and paintable: After drying, the adhesive surface can easily be machined, turned, milled and painted.
- Can be used on all kinds of surfaces (horizontal and vertical): Is applied easily on horizontal and vertical surfaces and does not run or sag.
- Resistant to stress, water, heat, oil and detergents: withstands pressure, moisture, heat, oil and detergents.
Directions for use
- The surface must be dry, clean and free of dust, oil or rust.
- For better adhesion, prepare metal surfaces with coarse sandpaper or a wire brush.
- Cut the required amount from the two putty components.
- Knead the putty by hand until a uniform grey colour is obtained (about 1 minute).
- Apply the putty to the desired place.
- For the initial set, leave undisturbed for 6 to 8 hours.
- Final strength is reached after 12 to 24 hours, and it can then be machined, turned, milled and painted.
Storage and warnings
- Store at room temperature and away from direct sunlight.
- Keep out of the reach of children.
Summary
If you are looking for a professional putty adhesive with a long working time and industrial strength, the slow-setting two-part putty - 90 minutes (2K EPOXY PUTTY - 90 MIN) is a reliable choice for you.
With its high adhesive strength, resistance to pressure, heat and chemicals, and the possibility of machining after cure, this product is considered a reliable solution for precise repairs, watertight sealing and filling in various industries.
It is also an ideal option for professional, corrosion-free repairs, for filling gaps and cavities in various surfaces, and for repairing leaks in parts.
The slow-setting two-part putty - 90 minutes combines strength, durability and shapeability, and guarantees the quality and longevity of your industrial and repair projects.
To see other products, visit the main page of Ghaffari Chemical Industries, and to explore similar products, see the two-part products category.
