Liquid Teflon – PS65
ANAEROBIC PIPE SEALANT – PS65
Sealing of metal pipe threads - contains Teflon powder - prevents fluid leaks
Introduction
The pipe and fitting sealant PS65 works on anaerobic technology and, once placed between metal surfaces and under vacuum conditions, begins to cure; this mechanism means the empty space between the threads is filled uniformly and leak paths are blocked.
This product is suitable for sealing metal threaded joints in fluid transfer lines, pneumatic equipment, hydraulic fittings and mechanical assemblies that require reliable sealing.
Compared with Teflon tapes, this type of liquid sealant creates a more even distribution over the whole thread surface and reduces the risk of displacement, tearing or pieces of sealing material being left in the joints; for this reason it is a suitable choice for more precise assemblies and industrial applications.
The final performance of this product depends on the type of metal, the thread clearance, the cleanliness of the surface and the temperature conditions during assembly; it usually acts faster on active metals, and on inactive surfaces or at low temperature it may need more time to reach full strength and sealing.
Applications
- Sealing of metal threaded joints in fluid transfer lines
- Pneumatic equipment
- Hydraulic fittings
- Usable in the assembly of metal pipes and fittings in general and industrial installations
Main features
- Powerful sealing of metal threaded joints: by creating a uniform layer in the space between the threads and preventing fluid leaks
- Advanced anaerobic formulation: which begins to cure and harden in the absence of air and between metal surfaces
- A suitable replacement for traditional Teflon tape: with more even distribution and less chance of displacement or tearing during assembly
- High resistance to pressure and vibration: in piping, pneumatic and hydraulic systems
- Usable in industrial and building-services equipment: for assembling all kinds of pipes, fittings and metal connectors
- Prevents leak paths: by completely filling the empty spaces between the threads
- Greater confidence in precise mechanical assemblies: thanks to uniform performance and suitable adhesion
- Fast set and high final strength: with an initial cure time of about 20 to 30 minutes and completion of the process within 24 hours
- Less contamination and leftover excess material: compared with traditional sealing methods such as Teflon tape
- Optimal performance on all kinds of active and inactive metal joints: with high compatibility in various industrial applications
Directions for use
- If the bolt and thread are contaminated, clean them.
- Apply a suitable amount of the product evenly on the thread so that, after assembly, it spreads over the whole engaged area.
- Assemble and tighten the parts, and avoid unnecessary movement of the joint during the early stages.
- The initial set time and the time to reach final strength depend on the type of metal, the ambient temperature and the clearance of the joint.
- Initial set is reached after about 20 to 30 minutes, functional strength within 1 to 3 hours, and final strength after 24 hours.
- To disassemble joints, use a suitable hand tool. (To make the work easier, it is suggested to first apply a little heat to the cross-section concerned)
Storage and warnings
- Wear gloves and a mask when using.
- Avoid contact with skin and eyes.
- Use in a well-ventilated area.
- Keep out of the reach of children.
- Store away from direct sunlight and heat sources, in a well-ventilated place.
Summary
Liquid Teflon PS65 is a professional, reliable solution for sealing metal threaded joints in industrial, building-services and mechanical systems. Using anaerobic technology, after assembly this product completely fills the empty space between the threads and prevents any leaks.
Compared with ordinary Teflon tape, ANAEROBIC PIPE SEALANT PS65 offers more uniform performance, higher durability and greater confidence in sensitive working conditions. If you are looking for a professional sealant for hydraulic and pneumatic fittings, fluid transfer lines and industrial equipment, this product can be a suitable choice for creating a safe, lasting seal.
View all pipe and fitting sealant products
View all products in the anaerobic category
View all products of Ghaffari Adhesive Industries
