Anaerobic gasket maker – GM86
ANAEROBIC GASKET MAKER
Complete gasket making and sealing of large threaded joints with a gap of up to 0.25 mm
Introduction
The anaerobic gasket maker GM86 is a sealant with an advanced formulation for securing installations and equipment. This product is designed specifically for sealing metal threads and, by forming a hard, impermeable polymer, offers high resistance to high operating pressures, making it an engineering choice for metal piping systems, especially copper and brass. In industrial installations and piping systems, a gap in large threads can lead to pressure loss and dangerous leaks; the anaerobic gasket maker GM86 can completely fill gaps up to 0.25 mm thick. Once curing is complete, the gasket formed has very high shear strength and resists intermittent vibrations and hydraulic shocks.
Applications
- Sealing of high-pressure piping systems in factory environments
- Assembly of copper and brass threaded joints
- Securing hydraulic and pneumatic equipment with large threads and large gaps under pressure
- Use in joints subject to continuous dynamic vibration
- Usable in fluid transfer lines including water, industrial oils, fuel and non-corrosive gases
Main features
- Resistant to hydraulic pressures and severe vibration
- Very high penetration into micro-gaps
- Complete prevention of leaks and rust in metal threads
- A completely safe, standard replacement compared with traditional sealants
- No clogging of sensitive filtration systems
Directions for use
- If the bolt and thread are contaminated, clean them. (Degreasing solvents are recommended before application).
- Apply a suitable amount of the product as a complete 360 degree ring on the bolt and thread. There is no need to shake the bottle.
- Tighten the joint until the appropriate torque is reached.
- Initial set is reached after about 20 to 30 minutes, functional strength within 1 to 3 hours, and final strength after 24 hours.
- To disassemble, heat the joint to about 250 degrees Celsius and open it with a suitable tool.
Storage and warnings
- Wear gloves and a mask when using.
- Avoid contact with skin and eyes.
- Use in a well-ventilated area.
- Keep out of the reach of children.
- Store away from direct sunlight and heat sources, in a well-ventilated place.
Summary
The anaerobic gasket maker GM86 is a professional, reliable solution for sealing metal threaded joints in industrial and building-services systems. By completely filling the spaces between threads and forming a resistant seal, this product prevents leaks of fluids and gases and offers stable performance under high pressure, severe vibration and hydraulic shocks. The ability to use it on copper, brass and other metal threads, together with its high resistance and ease of use, makes GM86 an ideal choice for the oil, gas, building services, hydraulic and pneumatic industries. If you are looking for a standard, durable and reliable sealant to improve the safety and service life of your equipment, the anaerobic gasket maker GM86 will be a suitable and effective option.
View all anaerobic gasket maker products
View all products in the anaerobic category
View all products of Ghaffari Adhesive Industries
